R2 hydraulic hose
An R2 hydraulic hose is a heavy-duty, highly flexible high-pressure line designed to transmit fluid power within demanding mechanical systems. It acts as the critical plumbing network for modern machinery, delivering the force needed to operate hydraulic cylinders, motors, and control valves under severe stress.
- Operating Pressure : High Performance Range
- Application : Industrial & Mobile Systems
About this item
An R2 hydraulic hose (commonly specified as SAE 100 R2 or EN 853 2SN) is a high-pressure, flexible line reinforced with two layers of high-tensile steel wire braids. It serves as an industry workhorse for medium to high-pressure fluid systems across agriculture, construction, and manufacturing machinery.
| Metric Category | Technical Specification & Performance Details |
|---|---|
| Hose Construction | Oil-resistant synthetic rubber inner tube; two layers of high-tensile steel wire braid reinforcement; abrasion, weather, and oil-resistant synthetic rubber outer cover. |
| Working Pressure | 75 Bar to 400 Bar (1,100 PSI to 5,800 PSI), depending on hose size. |
| Burst Pressure Rating | Designed with a 4:1 safety factor, providing burst pressure four times the maximum working pressure. |
| Temperature Range | Continuous operation from -40°C to +100°C (-40°F to +212°F), with intermittent peaks up to +121°C (+250°F). |
| Available Hose Sizes | Standard internal diameters ranging from 1/4 inch to 2 inch (ID). |
| Fluid Compatibility | Suitable for petroleum-based hydraulic fluids, mineral oils, water-glycol solutions, biodegradable hydraulic oils, and emulsions. |
| No-Skive Technology | Compatible with no-skive fittings, allowing direct crimping without removing or shaving the outer hose cover, reducing assembly time and installation errors. |
| Minimum Bend Radius | Highly flexible design with bend radius ranging from 100 mm (4 in) for 1/4″ hoses up to 630 mm (25 in) for 2″ hoses. |
Reviews
There are no reviews yet.