R1 hydraulic hose
An R1 hydraulic hose (standardized as SAE 100R1 or EN 853 1SN) is a single-wire braided hose designed for low-to-medium pressure hydraulic systems. It serves as a flexible conduit to transport petroleum-based and water-based hydraulic fluids across industrial, agricultural, and automotive machinery.
- Operating Pressure : High Performance Range
- Application : Industrial & Mobile Systems
About this item
An R1 hydraulic hose (standardized as SAE 100R1 or EN 853 1SN) is a single-wire braided hose designed for low-to-medium pressure hydraulic systems. It serves as a flexible conduit to transport petroleum-based and water-based hydraulic fluids across industrial, agricultural, and automotive machinery.
| Category | Parameter / Property | Technical Specification & Feature Details |
|---|---|---|
| Standards | Industry Certifications | Meets or exceeds SAE 100R1AT and DIN EN 853 1SN specifications. |
| Construction | Inner Tube Layer | Smooth, oil-resistant synthetic rubber (typically Nitrile/NBR). |
| Construction | Reinforcement Layer | Single layer of high-tensile braided steel wire braid. |
| Construction | Outer Cover Layer | Abrasion, ozone, and weather-resistant synthetic rubber cover. |
| Pressure | Working Pressure Range | 575 PSI to 3,250 PSI (40 to 225 Bar), varying by hose diameter. |
| Pressure | Safety Burst Factor | 4:1 ratio (Burst pressure is 4 times the maximum working pressure). |
| Temperature | Operating Range | -40°C to +100°C (-40°F to +212°F) for continuous service. |
| Fluid Compatibility | Approved Mediums | Petroleum-based oils, water-glycol, water emulsions, air, and water. |
| Flexibility | Bend Radius | High flexibility; easily routes through tight engine spaces. |
Reviews
There are no reviews yet.